Necromunda: House Escher WIP Part 3

Welcome back to the ongoing saga that is my Escher gang! If you have read part 1 and 2, you know all about my process in converting and preparing my gang to be painted. Having a few under my belt now, I have a solid process that I plan to take into the rest of the gang, and will share that with you now ūüôā

Buck.jpgI decided to start with my Tank Girl inspired ganger, aptly named Buck (Tank Girl’s name being Rebecca Buck). As a side note, it made me happy to be able to arm her with a shotgun, going for the double reference. Buck helped flesh out a lot of the gang color standard that you will see through the rest of the models. There are four¬†standard transitions that I used here; skin, chest, boots/shoulder, and pant/knee colors. The boots and shoulders, except on a couple models, all receive the same color progression. I started with a base coat of The Fang, followed by a wash of Druchi Violet. Once dried I highlighted with The Fang once more, followed by Russ Grey for extreme highlight areas.

IMG_2031.JPG

The lighter purple that you can see on the pants, shins and boots of Phantra, to the left, were a progression of Daemonette hide, druchi violet, a highlight of daemonette hide with warpfiend grey as the extreme. Their loin cloths, meant to be made from their prison world garb, were all done using deathworld forest as a base, athonian camoshade to shade, elysian green as highlight and ogryn camo on the extreme edges. Belts and straps were rynox hide, agrax earthshade, gorthor brown and then baneblade brown. Bone saw a traditional Zandri dust, seraphim sepia and then ushabti bone highlight. Eye makeup was simply Dark Reaper, while Phantra’s mask was a layer of

IMG_2051.JPGwaywatcher green, gauss blaster green highlight¬†with¬† evil sunz scarlet for the freehand. The tops/chest armor was a progression of glazing and shading to get the blending seen. Incubi darkness went on as a base, with carroburg crimson going on the under shade area of the chest to give a richer shade. Thin glazes of kabalite green and then sybarite green went on to form gradient highlighting, with coeliac greenshade used to tie in transitions. Skintone started with Bugman’s glow, followed by Riekland Fleshshade as a wash. Cadian Fleshtone started the base highlight, with kislev flesh¬†forming the extreme highlight and, in areas like noses and knuckles, flayed one flesh used for a higher extreme. lips were simply bugmans glow with carroburg crimson washed over.

IMG_2091.JPG

The faint shaved stubble on many of their heads, as seen on our sneering Juve, was achieved through glazing a 50/50 combination of mechanicus standard grey and kislev flesh, then changing it to a 2:1 ratio, heavier on the flesh tone. Flayed one flesh was used to give a scar here and there on the scalp. Eyes were nothing more than fleyed one flesh with rynox hide as the pupils, and eyebrows saw rynox as the color of choice, as well.

This covers most every color scheme on my Escher, thus far. Please feel free to comment or ask any specific questions, if I didn’t cover something that you want to know about. Thanks for reading ūüôā

IMG_2064.JPG

 

Advertisements

Necromunda: House Escher WIP Part 2

When I built my gang leader, I did it with aesthetic in mind. Her weapon loadout wasn’t created with any sort of point value calculated. With her done and my focus moving toward the rest of the gang, I needed to get that piece figured out so these were not only good looking but viable on the table.

01cb82f375be0582650b59880281d6ee31447cacb7.jpgMy champion was next in line for building. I gave her the combibolter that is normally seen on the gang leader, in stock builds, due to a lower cost. While the chem weapon option seems great, I opted to go cheaper and then outfit others with grenades to make up for the loss of template. The build was more straight forward, simply giving the coat and gun to her, while removing the whip. For some added difference, I covered over the chest to unify the plating and decided to give her a half mask. The idea popped that she uses it to cover the scar that she has. Also that if she has a scar like the leader, then it could be something ritualistic within the gang, perhaps a method of removing their penal  world identification tattoos.

01b27162de778a4f9d9c6be7b85359167f9c55619d¬†I decided to skip to my Juves next. My list called for three of them, so I did them all in a bit of a batch build.¬†¬†¬†These are supposed to be the fresh blood of the gang., so I imagined that they would be pulled from the population on Necromunda and¬†not from the penal world; so no tattoos. Scarring would happen later, if they live long enough to seemembership. To make them seem newer, I used some heads from Victoria Miniatures again, as the hair isn’t as wild as the Escher. Like the champion, I used greenstuff to give more of a cloth look over the chest.0135cea49f21c6cabc4ba49d5b838e8861c0f35846.jpg

I hit a small wall when I started my gangers. The first two I decided to give some IG shoulderpads, keeping in theme with the looted armor that the leader had (the two on the right). otherwise the build was rather plain on them.

The farthest left used what I had learned while making the leader; using witch elf torsos. At this point I had covered over every models chest to make a “uniboob” torso. I decided to go the opposite, here. I have always been a fan of Tank Girl, so this was sort of inspired by her. I used greenstuff to fill out the bikini on her while trimming and smoothing out her head to give the shaven head look with just a couple bangs in the front left. The ganger next to her is when I started to add some humor to them. I found a space marine scope in my bits and thought it would be funny to put it on a shotgun. This eventually turned into making her a blind sniper, having double optic lenses to see, in addition to the scope. I stole a leg plate from the Goliath kit to add a little extra to her.

Then there was the final ganger…. if you follow my twitter feed, you probably saw her.

01953214d6435ff0f3553706f16347131a010b9ac4.jpg

I made her on Monday’s stream. I had an idea to make a ganger with a gut, like Kiki Bulldozer from Raging Hero’s JailBirds. It was then suggested that she be made pregnant. I initially fought the idea but then, after finding it more humorous, decided to start sculpting it. I then remembered the cigars from the Goliath box and decided she needed to be smoking as well. The nun habit just seemed like natural progression, at that point, which was then added with greenstuff as well. It is a direct result of bad influences and feeding off from them. That being said, I love her and can’t wait to make her a focal point of the gang.

With her done, the gang build was complete.0170ddd3ce56fa58c6537d2612419b07d6ab1b1c88.jpgWith assembly and sculpting finished, it was time to finish their story and¬†put some paint¬† on them. Who gets painted first? That is part 3’s job to tell us.

Until then, thanks for reading ūüôā

Soph

Necromunda: House Escher WIP part 1

Like many in the gaming community, I was ecstatic when news dropped about Necromunda’s release. I was an avid player of the original,¬†playing mostly Escher and Redemptionists.¬†I truly loved the look of the models when I saw the new box¬†but, as per usual, wanted to find¬†ways to make them my own and to have them stand out from the basic kits. I finally got my hands on a box on release day and quickly set to do just that.

017dd815ca113314ed05cb9a8d19c787dc47c2fac6.jpgI started with my leader, who in my mind¬†should be the most flashy model to stand out from the rest. Having done multiple female builds at this point (with write-ups coming, super promise) I had a few options, when it came to bits. My eyes focused on the Age of Sigmar Sorceress model, having picked one up a while back to use for my Amazon team created from witch elves. I thought she could work nicely as a thrower at the time, but slowly the idea faded and she waited on the Warhammer Quest character back burner. The extended arm would work well for holding a pistol out, I had thought, so I started dicing her up and came up with an initial outline. The torso, once sawed off from the Sorceress, lined up perfectly with the Escher legs that were freed from their host. I had wanted to do a segmented leg, to give a different boot look, but the idea didn’t fully pan out and I went 01bf5c32570f699dfd6b5df9c20fce5eb0da89a28a.jpgwith the traditional leg for that portion of the kit. I used some greenstuff to do any minor gapfilling needed in order to join the two halves together. The extended arm was simple; I just cut the sorceress arm off at an angle to line up with the end of the glove. I was already falling in love with this pose and it started helping in fleshing out who this person was and what this gang would be like. I envisioned this woman staring down her plasma pistol completely relaxed and uncaring of what layed on the other end. The pose, with head tipped back would lay the foundation for the next ideas to pop in my head; the face. Fortunately, the faces for all the witch elf models are separate from the heads. They are far too angular for a human look, something I ran into when making my Amazon team. I needed something that would work well with this pose and this build. Fortunately, I didn’t have to look far. I had purchased some female heads from Victoria Miniatures to be used for my Sisters of Battle; the Guthrie female heads, to be exact. I had bought them after I learned that Armies on Parade did not allow 3rd part bits, so I had to find another solution. From these heads,¬†I found the perfect head for her.

0124a9263e026501b90f9c013b6c6d7d2ddc170238.jpgThe head was smiling, which I thought was a¬†fantastic addition. Now I had this¬†gang leader¬†grinning as she eyes her target. I quickly thought of this mentally deranged gang who were escapees from a penal world, which was building off the generic penal inmate idea I originally had. I wanted to make them look unstable and give some looted gear, like it was lifted off from imperial guards during this escape.¬†I was also leafing through the rulebook and absolutely loved the look of the Belladonna character art they put in there. It became a partial inspiration for where I headed, deciding I wanted a feather headdress for my leader.¬† To build, the head was cut and filed to fit the head with¬†hair being glued in place around it. I had to file down both her chest and the cadian plate piece heavily but after a bit of work, it fit. I also gave it some bullet holes; the blows she would have given the poor guardsman she took it from.¬†The feathers would come from the Tzeentch Acolyte kits. I had them on hand, so it was an easy grab in order to get feathers; nine total. I made a crown from the iron halo from Saint Celestine, as I had a spare sitting around, and sat it overtop the feathers already in place. After the crown, everything else was downhill; a powersword clipped from a Sisters of Silence kit was fit onto her right hand and then I used greenstuff to sculpt the back piece for the vest. I decided to add some scarring on her right cheek and neck, to make her a little more weathered as a ganger. The result:015f4099a9c695fe196f4650ec357e3597db8e5978.jpgA really fun build that took me about three or four days of work to do. I cannot wait to get some paint on her. We have ten others to build, however, which I will show you in part 2. Thanks for reading ūüôā

Chibi Deadpool.

 

dead1.jpgNot all that long ago, I decided I wanted to test myself and do a project from the ground up; sculpt, base, and paint. I had joined the #boxofmanythings, on twitter, and in my search for something to give my person of the month, I decided this would be a great opportunity to do just that. I decided to do a chibi Deadpool for a few reasons. I had recently become more interested in modeling and painting chibis, I like Deadpool, and I found a cute image as my inspiration, when deciding on what to do.

I started with chibi1.jpgsome cardboard from a games-workshop box (lizardmen stegadon, to be exact) and some greenstuff. I folded the cardboard into an L to form the ground and wall behind him, and then set the blob of greeenstuff down in the shape of a Y. Once down, I shaped I to form the feet, legs and a portion of the belly before smoothing out all the imperfections (and my finger prints).

My tools at this point were my exacto knife and my coulour shapers. the chisel and taper points came in handy throughout this entire project to help smooth the body.

 

chibi2.jpg

After letting the legs dry overnight, I came back to continue. Forming a U shape of greenstuff, I set it down over the upper torso section. I then added more greenstuff, building up the belly a little more (for the extra pudge) and added the utility belt. My trusty pin helped in making the Deadpool symbol on his belt buckle. The rest was finger formed and smoothed out by colour shapers.

chibi3.jpg

 

Day three saw the head come into place. another big blob of greenstuff, rolled into a ball, was set onto his shoulders. A small piece was stuck on the end to form the excess cloth on his mask. Using a mix of pin, exacto knife and shapers, I made the eyes and mask markings, as well as the black outline on his suit (not shown). Small bits of greenstuff were flattened and cut into triangles to form the flaps on his ammo packs; a small ball rounded and pressed ito each to form the button. Brass rod was shoved right through the head, with a suction cup sculpted around it. Day four saw the addition of basing material (Citadel Armageddon dusk) and the cinder blocks/bricks formed. Hardboard from the same box as the base was cut into strips before segmenting each into small rectangles and fit to the back.

The piece was painted using a Khorne>mephiston>wild rider red progression for the suit. The brick was done with dark reaper>eschin>dawnstone progression. I added spray cans made from ork skikkbombs after freehanding the lovenote from Wade onto the brick.

dead1.jpg

dead3.jpgdead2.jpg

Tutorial 1: Bandanas

Welcome to my first tutorial! Today I will show you just how simple it can be to add a bandana on your ork, or any other model you so choose. Being the Freeboota Kaptain scourge of the galaxy that I am, I sculpt them on my ork boyz to give them a bit more of a pirate look.

Here are the materials I used:

your model (I used an Ork Nob specifically for this example)

Greenstuff

Hobby knife

Soft size 0 wedge colour shaper (though a flat bladed sculpting tool could work)

20170717_032550365_iOS  Here we see our ork and his soon-to-be bandana getting acquainted. Once mixed up, pull off a piece of greenstuff and roll it into a ball roughly the size shown; a little under the size of a pea. I never use an exact measurement as it can vary depending on the head you are placing it on. You want enough that it will smoothly cover the head but not look as though they are wearing a pillow. Once you have your ball, mush it right on the top of its head, making sure not to cover the eyes and keeping the coverage even over the entire top of the head.

 

20170717_032853585_ios.jpg

Once properly smushed onto his head, give it a smoothing out with your shaper or sculpting tool. I won’t go into a big long explanation on tools here, but I am a BIG fan of colour shapers. They make smoothing out greenstuff beyond easy, without a lot of reshaping of your original piece. That being said, if you are careful, any flat and lubricated sculpting tool should work. Once you place your greenstuff, you will constantly want to smooth out any fingerprints you get on it; and you will get them on it as you add the next two parts.

These are your next two pieces; the knot and the ends of the bandana. For the knot, you want just a small bit of greenstuff, rolled into a ball (seen in the picture on the left along the ruled edge). Carefully place it onto the side of the head, as close to the “back” as you can, and lightly press it in to give it a more oval shape. Once in place,¬† take your¬†hobby knife, lightly lubricate it to prevent sticking, and press a small “y” shape in it with the blade¬†to create¬†the look of the knot. After smoothing any fingerprints out,¬† move to the end piece. The size of the piece you use is up to you; they can be longer or shorter but regardless of size, you want to press them into a somewhat flat diamond shape (seen in the picture on the right).

20170717_033627755_iOSOne end of the diamond shape should¬†be pressed lightly into the back of the knot to connect it, with the rest curved downward.¬† Once in place, separate the piece into what will appear like two tail ends, using your hobby knife, leaving the outer side larger than the inner. Don’t cut all the way though, just score the shape of the outer tail end.¬†This will help create the effect of one end overlapping the other. Press into the bottom of the piece with your knife, connecting with the existing separation¬†to create the tips.

20170717_034223156_ios.jpgUsing your sculpting tool or shaper, press in on the inner end, flattening it out, while letting the outer tail end remain raised. Make sure that, while you want to flatten the inside end, you also want to maintain the shape of its inner edge. Once flattened, you should see it appear as if the outer end is laying overtop the side of the inner (see picture to the right). With the two ends formed, use your hobby knife once more and lightly press into the center of the outer bandana end, making an oval shape. Once created, use the tip of your tool to even out the newly created crevice, forming the fold.

 

20170717_034423267_iOSAt this point, you are mostly done! The final step is to add stretch points into the cap. Fabric would have some creases, being tied into a knot around the wearers head. Using your hobby knife, carefully make a make two or three lines, starting at the bottom of the cap and moving upward, connecting to the knot. The picture on the left shows that, for this example, I chose two lines. Do this for both sides of the knot. Once done, do a final smoothing to remove any lingering finger prints.

 

20170717_040309569_iOS

That is all there is to it! As you become comfortable, experiment with adding more creases into the cap or differences in the ends. It is an easy way to modify your miniature and add some uniqueness to them. Hopefully this has helped you, if you are looking to try this and as always, feel free to send me any questions or comments.

until next time ūüôā

-Hobbyistgirl

 

 

 

 

A new home

As 2017 rolls through into its second half, I thought it appropriate to start something that, at this point, can seem as dead as the newspaper. I’ve blogged before, on different sites and about different subjects, most reading more like a Facebook wall than anything else. Who doesn’t want to read about my top five favorite bands or how President ______ is ruining everything, after all?

This time, it is different.

I have been painting for what seems my whole life. I started back in the late 90’s when some friends and I picked up Warhammer 40,000 from a small little hobby store in the midst of a flea market. I quickly became hooked, painting up the marines and orks that came in the box. The others, while enthusiastic at first, eventually dwindled away; each a different reason than the other. I maintained, though not without my own lapse from time to time. My painting was a sporadic endeavor, lasting for a couple of years at a time before hibernating.¬† By the time I would restart, any muscle memory or skill I had learned before was gone. I would relearn what was lost just in time to stop again.

This time, it’s different.

It started with Bloodbowl. I had lost 99% of my hobby supplies and miniatures in a flood three years ago and the idea of getting back into the swing of things seemed very daunting. I really felt the urge to paint, however, and the new edition of Bloodbowl was my foot in the door. I started buying all the teams, and of course the colors needed to paint them, logging all of it on my Twitter account. Gradually I started eyeing the 40k line, once more. I would look over the orks before talking myself out of them, using polls to steer me away; at this point I think I technically owe my followers an Emperor’s children and a Vostroyan army. I even started a test miniature for my paint scheme for Vostroyans before realizing I could not shake what I really wanted to do; Orks. Not just any…they had to be Freeboota Orks. This project, coupled with a dreadnought done up for a charity raffle, saw me painting and modeling every night for hours; even longer on the weekend.

This time it is different

It isn’t just something to keep telling myself to stay focused. I am in a place where I am enjoying the hobby more than I have since the first day we cracked open the Second Edition starter box, over two decades before. It is more serious this time, with more skill involved then I was ever able to acquire. I keep pushing myself more and more, and have befriended others who help push me to learn new things and make each model better than the last.

It is different…

and I am glad to be able to share it all with whoever comes to read and learn about it.